Protect barrels & IBC against corrosion, quality degradation of substances contained & the escape of harmful aerosols.
Have you noticed condensation droplets inside your barrel or IBC or even worse: Rust, water in the stored medium, sludge deposits and an aggressive smell when the barrel or IBC is refilled? The cause: Moisture and dirt particles entering the barrel or IBC unhindered when stored medium is released and air is sucked in to equalize pressure, plus aerosols escaping when the tank is refilled.
Let‘s face it, if you don‘t do anything about it, you‘re heading for expensive maintenance work and damage to employees and environment.
Luckily, there‘s a solution: the installation of an GIEBEL Adsorber®. It dries and cleans the supply air and prevents pollutants from escaping - saving you maintenance work and money.
Why water & dirt should be you biggest concern?
IBCs and barrels are often used to store substances such as ester oils so that they can be used when required. These oils are highly hygroscopic, i.e. they literally attract moisture.
Up to the saturation point of the oil, water is present as dissolved water and is not visible to the naked eye. Under pressure or with temperature fluctuations, this water emulsifies or so-called free water is formed. This is particularly harmful for lubrication systems as the incompressibility of the water removes the hydrodynamic oil film that protects the bearings. Excessive wear is the result.
Water also reduces the durability of the oil by accelerating oxidation and breaking up the hydrocarbon chains. Oil containing additives is even more susceptible to water contamination. Additives and water react to form acids that increase corrosion in machinery.
Preventing the entry of moisture is therefore the top priority in order to store hygroscopic substances for a long time, at low cost and without causing consequential damage to the machines for which these oils are intended. Exactly what our GIEBEL Adsorbers® do!
Breather dryers
Breather dryers adsorb humidity and thus prevent water from entering machines.
Oil mist separators
Oil mist separators prevent oil aerosols and pollutants from escaping machines.
Breather dryers for barrels & IBC.
D = Disposable
R = Rechargeable
VV-D
Basic breather dryers for barrels & IBC.
Disposable
Indoor, outdoor & offshore use
VV-R
Eco breather dryers for barrels & IBC.
Rechargeable
Indoor, outdoor & offshore use
MA-R
Premium breather dryers for barrels & IBC operated in harsh environments or with aggressive operating fluids .
Rechargeable
Indoor, outdoor & offshore use according to ATEX
Oil mist separators for barrels & IBC.
D = Disposable
R = Rechargeable
VG-D
Basic oil mist separators for barrels & IBC.
Disposable
Indoor, outdoor & offshore use
VG-R
Eco oil mist separators for barrels & IBC.
Rechargeable
Indoor, outdoor & offshore use
FAQ regarding barrels & IBC.
Malfunctions & troubleshooting
Product quality decreases when moisture, particles, or oxygen enter the barrel or IBC. This accelerates chemical reactions, oxidation, and contamination, especially during long-term storage or frequent dispensing.
What you can do: Install a GIEBEL Adsorber® to filter out moisture and particles from the incoming air and maintain consistent product quality.
Bacteria and fungi, such as diesel bugs, thrive in barrels and IBCs when moisture accumulates inside the container. Even minimal water content creates a breeding ground, especially in fuels and lubricants.
What you can do: Prevent moisture ingress from the start by fitting your container with a GIEBEL Adsorber®. This keeps storage conditions dry and helps avoid microbial growth.
Corrosion forms when internal surfaces of barrels or IBCs are exposed to moisture over time, especially during outdoor storage or temperature shifts. This not only damages the container but can also contaminate the stored product.
What you can do: Use a GIEBEL Adsorber® to block humid air from entering, significantly reducing condensation and protecting both your container and product from corrosion.
Product spoilage during storage is mainly caused by moisture ingress and condensation. When barrels or IBCs breathe during dispensing or due to temperature changes, humid air enters and condenses inside the container. This leads to degradation of oils, fuels, chemicals, and other sensitive materials.
What you can do: Use a GIEBEL Adsorber® instead of standard venting to remove moisture from the intake air and keep your product protected during storage and use.
Barrel & IBC oil & filtration
Shelf life depends on the material stored and exposure to environmental conditions. Moisture ingress drastically reduces storage time. By keeping the air dry, you can significantly extend product usability.
What you can do: Use a GIEBEL Adsorber® to extend shelf life, minimize spoilage, and reduce unnecessary disposal costs.
Typical signs of contamination include a milky or cloudy appearance, phase separation, unusual odors, color changes, or microbial growth. These are often the result of water ingress or particle contamination.
What you can do: Prevent contamination before it starts by fitting a GIEBEL Adsorber®, keeping the air entering your container clean and dry.
Contaminated oils, fuels, or chemicals can damage machinery, clog filters, cause inefficient combustion, or lead to product failures in downstream processes—resulting in higher costs and operational risks.
What you can do: Use a GIEBEL Adsorber® to avoid contamination and safeguard both your stored product and equipment from avoidable damage.
Efficiency & optimization
Stable storage conditions are achieved by preventing moisture and dust ingress. This keeps the product in its original quality, minimizes waste, and reduces rework in your processes.
What you can do: Install a GIEBEL Adsorber® to create clean, dry storage conditions and maximize product reliability.
Spoiled product often results in costly waste disposal or reprocessing. By preventing moisture ingress, you maintain quality, avoid spoilage, and reduce unnecessary product losses.
What you can do: Use a GIEBEL Adsorber® to reduce product spoilage and lower disposal costs over time.
Service & parts
GIEBEL offers various adsorbers designed for different container sizes, storage durations, and product types—whether you store oils, fuels, or chemicals. The choice depends on your specific storage and environmental conditions.
What you can do: Contact GIEBEL or use our product finder to select the most suitable adsorber for your barrels or IBCs.
GIEBEL Adsorbers® can be easily installed using barrel plugs, adapters, or quick connectors. They fit directly onto standard barrel or IBC openings and can be installed within minutes without complex modifications.
What you can do: Choose the right GIEBEL mounting accessories and follow the simple installation steps for immediate protection.
Our adsorbers are equipped with color-changing desiccants that indicate saturation. When the color fully shifts, it’s time to refill or replace the desiccant to maintain effective protection.
What you can do: Monitor the saturation status regularly and replace the drying agent promptly to prevent contamination risks.