Protect gears against corrosion, loss of oil quality, poor lubrication & the escape of pollutants.
Have you noticed condensation droplets inside your transmission tank or even worse: Rust, free water and dirt in hydraulic oil, poor lubrication, signs of abrasion and an oily smell when the unit is running? The cause: moisture and dirt particles entering your system unhindered every time it draws in air to equalize pressure, plus oil aerosols escaping when it breaths out.
Let‘s face it, if you don‘t do anything about it, you‘re heading for expensive maintenance work and damage to employees and environment.
Luckily, there‘s a solution: the installation of an GIEBEL Adsorber®. It dries and cleans the supply air and prevents pollutants from escaping - saving you maintenance work and money.

Why water & dirt should be you biggest concern?
When metals react with oxygen and water, this is known as corrosion. It leads to the formation of hard, highly abrasive particles. In gear oil contaminated with water, these metallic impurities trigger an oxidative chain reaction. Free radicals are formed, which attack the hydrocarbon molecules and break down the oil. But that‘s not all: when oil additives react with water, acids are formed that further accelerate the decomposition. Over time, oil properties such as lubricity, viscosity and shear strength change.
With higher flow characteristics, friction points are no longer supplied with the necessary volume of hydraulic oil. Extremely viscous oils, on the other hand, put a strain on the system‘s drive units and reduce efficiency. Oil ageing residues clog valves, sludge formation increases filter requirements and acidification hightens the risk of corrosion of all metallic components, plus impairs the seals.
Preventing the entry of moisture and dirt as well as the formation of corrosion is therefore the top priority in order to operate gears for a long time, cost-effectively and with low maintenance! And that is exactly what our GIEBEL Adsorbers® do!
Breather dryers
Breather dryers adsorb humidity and thus prevent water from entering machines.
Water separators
Water separators prevent liquid water from entering gearboxes.
Oil mist separators
Oil mist separators prevent oil aerosols and pollutants from escaping machines.
Breather dryers for gears.
D = Disposable
R = Rechargeable
DV = Disposable + Valves
RV = Rechargeable + Valves
Water separators for gears.
D = Disposable

HS-D
Permanent water adsorbers to protect gears from water droplet ingress while allowing them to breathe
Indoor, outdoor & offshore use
Oil mist separators for gears.
D = Disposable
R = Rechargeable

VG-D
Basic oil mist separators for turbo gearboxes, testbenches & recirculating oil lubrication systems.
Disposable
Indoor, outdoor & offshore use

VG-R
Eco oil mist separators for turbo gearboxes, testbenches & recirculating oil lubrication systems.
Rechargeable
Indoor, outdoor & offshore use
常见问题解答——为您解答疑问。
GIEBEL Adsorber® 是一种干燥剂过滤器,用于去除输送至液压系统、齿轮、储罐、油桶、IBC 容器和变压器的进气中的水分和杂质。它可防止这些系统内部产生冷凝水,并避免由此引发的损害,例如腐蚀和油品劣化。
GIEBEL Adsorber® 的核心是高性能干燥剂 GIEBEL Xdry®,由橙绿色硅胶和 13X 分子筛组成。与传统的硅胶过滤器相比,它具有显著更高的干燥能力,即使在高温和低湿度条件下,也能可靠地保持系统干燥。
在停机时间较长的系统中,阀门可保护呼吸式干燥器免受不必要的负荷影响;此外,我们多样化的连接件和配件使安装变得轻而易举——即使在狭窄的空间内也是如此。
GIEBEL Adsorber® 将气流引导至系统内部,使其先经过干燥剂和3微米滤芯,确保水分和污染物不会对系统内部造成损害。它能有效防止腐蚀、防止工作油变质以及添加剂失效。
当空气被强制排出系统时,该吸附器还会过滤排气中的油颗粒和气溶胶。
GIEBEL Adsorber® 从投入使用的第一天起就为您的系统提供保护。通过防止设备损坏,它确保工厂保持低维护、耐用且盈利的特点。
当然,吸附器也可以随时进行加装。需要安装通气滤清器的明显迹象包括:运行油的质量出现可测量的下降、油箱内或油箱盖上出现冷凝水滴,以及出现
无论您是需要一些建议,还是对已购买的产品有疑问——我们都很乐意为您提供帮助。
您可以通过我们的通用电子邮箱 info@gf-dry.com 与我们联系,并在此处查看所有当地联系方式。





